🧵 Drums up to 300 kg
Feeds cables from drums weighing up to 300 kg, without loading the machine with pulling a heavy drum.
Samec AL32-50 pulls flexible round and flat cables from a drum and feeds them to cutting or cut-and-strip machines. The cable is pulled by two motor-driven transport belts, and the speed is controlled by the H unit: the higher it rises, the faster the pre-feeder feeds the cable. If the H unit reaches its maximum height, it stops all connected machines. The belt area is enclosed by a hinged, interlocked Plexiglas guard. The AL50 version is available with a wire accumulator.
Samec AL32-50 pre-feeder, version without wire accumulator
Two transport belts pulling the cable
Control panel and belt-area guard
Samec line: pre-feeder, marker, cut-and-strip machine, coiler
Feeds cables from drums weighing up to 300 kg, without loading the machine with pulling a heavy drum.
Flexible round cables up to Ø 32 mm, flat cables up to 50 mm. For wider flat cables, the manufacturer supplies a dedicated H unit.
The position of the H unit controls the feed speed, which adjusts itself to the machine.
A pre-feeder stop or fault stops the connected machine, and the H unit reaching maximum height stops all machines.
| CE compliance | ✓ |
|---|---|
| Max. drum weight | 300 kg |
| Max. flexible cable diameter | Ø 32 mm (multi-core cables: max. Ø 32 mm) |
| Max. flexible flat cable width | 50 mm (multi-core flat cables: max. 32 mm) |
| Feed speed | max. 1.5 m/s (elsewhere in the datasheet: adjustable, max. 2 m/s) |
| Electrical supply | 230 V – 50/60 Hz – 5 A, max. power 1.5 kW |
| Compensation rollers | Ø 200 mm • option: Ø 320 mm |
| Option | Roller unit |
| Pneumatic supply | 6 bar, continuous operation |
| Dimensions and weight | 1830 × 850 × H 1535 mm • 130 kg |
| Compliance | Electrical installation to EN 60204-1 |
When the machine has to draw cable from a heavy drum and pulling it directly through the machine's rollers would cause slippage or length errors. The pre-feeder takes over pulling the cable, and the H unit matches the speed to the machine. Unlike the MAC pay-offs, the AL32-50 does not rotate the drum; it pulls the cable with belts.
Flexible round cables up to Ø 32 mm and flat cables up to 50 mm wide (multi-core flat cables up to 32 mm), from drums weighing up to 300 kg.
The cable passes through the H unit. When the machine needs more cable, the H unit rises and the pre-feeder speeds up until the speeds match.
Yes. For flat cables wider than in the data table, the manufacturer can supply a special H unit.