Data from the manufacturer's datasheet • Samec Macchine RV350D

Samec RV350D – cable coiler with two plates

Pin cable coiler with two plates • cables up to Ø 16 mm, coils Ø 140–350 mm

Samec RV350D has two rotating plates with pins under a Plexiglas guard. When coiling is finished, the operator presses the pedal, the guard slides over the second plate, the pins rise and the next coil starts. Meanwhile, the operator removes the finished coil from the first plate, which must be empty before the next press of the pedal. The electronics match the coiling speed to the set coil diameter and the machine speed.

📸 Photos from the datasheet (click to enlarge):

Key features of the RV350D:

🔁 Two plates, less downtime

One coil winds while you remove the other.

🌀 Coils Ø 140–350 mm

Cables and tubes up to Ø 16 mm, depending on flexibility.

⚡ Up to 2.5 m/s

Coiling speed matched to the set coil diameter and the machine's operation.

🖥️ 7-inch screen and 300 programs

Operating modes, parameters and diagnostics on the touchscreen.

Technical data (per the Samec RV350D datasheet):

Data input7-inch touchscreen
Program memorymax. 300
Number of plates2
Coiled piece lengthDepends on cable diameter
Coiled cable diametermax. Ø 16 mm (depending on flexibility)
Coil inner diametermin. 140 mm
Coil outer diametermax. 350 mm
Coiling speedmax. 2.5 m/s
Electrical supply230 V – 50/60 Hz – 6 A
Pneumatic supply6 bar, continuous operation
Dimensions and weight950 × 1050 × H 1200 mm • 200 kg

Example Samec line (inline):

1 Pay-off / pre-feeder Feeding cable from the drum
2 Inkjet marker Marking the pieces
3 Samec TSA machine Cutting, stripping, unjacketing
4 RV350D coiler Coiling pieces into coils

🧰 Standard equipment and options

When to choose the Samec RV350D?

When you coil many short pieces into small coils and don't want the machine to wait while a coil is removed. Two plates let you remove a finished coil while the other one is winding. For larger coils (up to Ø 500 mm) there is the RV500.

Frequently asked questions (FAQ):

How does a two-plate coiler work?

When coiling is finished, the operator presses the pedal, the guard slides over the second plate and the next coil starts there. The finished coil on the first plate must be removed before the pedal is pressed again.

What coils does the RV350D make?

Coils with an inner diameter from 140 mm and an outer diameter up to 350 mm, from cables and tubes up to Ø 16 mm (depending on flexibility).

Does the RV350D work with other manufacturers' machines?

Yes, with the optional encoder unit with external sensors.

Samec RV350D Two-plate coiler Pin Cable Coiler up to Ø 16 mm Coils up to Ø 350 mm