📷 1–3 Camera System (up to Ø 200 mm)
Configuration with 1, 2 or 3 cameras and lenses lets a single device test extremely small cross-sections as well as cables and tubes up to 200 mm (7.87") outer diameter.
VisioCablePro® / VisioTubePro® VCPX5 (Product No. 401.0020.07) is a versatile, shock- and vibration-resistant camera station designed for use directly on the production floor (at extrusion lines) and in quality control laboratories. With 1 to 3 high-resolution cameras, it precisely measures both very small wires and massive power cables or tubes up to 200 mm in diameter.
Configuration with 1, 2 or 3 cameras and lenses lets a single device test extremely small cross-sections as well as cables and tubes up to 200 mm (7.87") outer diameter.
A factory-locked optical focus (default optical focus) and intelligent automatic lighting guarantee 100% measurement repeatability regardless of the user.
An optimised sensor layout and balanced mass distribution (54 kg) provide full resistance to vibration and shocks occurring directly on the production floor.
Implementation and training take just 15 minutes. Full compatibility with VELOX, ProCable 3 and the CIQ-AESA, ADVARIS, QDA-ASI-DATAMYTE and QUASAR systems.
| Product No. | 401.0020.07 (Measurement Device VCPX5) |
|---|---|
| Measuring range | Up to max. 200 mm (7.87") cable or tube outer diameter |
| Camera system | 1 – 3 high-resolution cameras (selected for min. and max. sample diameter) |
| Resolution | Corresponds to 0.1% of the image field |
| Lighting | Intelligent, automatic lighting + fixed factory optical focus |
| Cable standards compliance | IEC 60811-201; -202; -203 • LV112 (A Factor) • ICEA S-94-649 |
| Measuring software and CAQ | VELOX (measuring software), ProCable 3 (CAQ system) |
| Compatible external CAQ systems | CIQ-AESA, ADVARIS, QDA-ASI-DATAMYTE, QUASAR and others |
| Software user levels | Production, Laboratory, Administrator, Service (initial training time: ~15 min) |
| Electrical supply and power consumption | 110 – 230 V / 50–60 Hz • Power consumption: max. 100 W |
| Overall dimensions (W × L × H) | 560 × 600 × 910 mm (22 × 23.6 × 35.8 in) |
| Weight | 54 kg (119 lbs) – shock- and vibration-resistant design |
When you need geometry measurement of insulation and jackets on cables and tubes up to Ø 200 mm, in the lab or at production, with a report per IEC 60811-201/-202/-203 and LV112. Results can be passed to CAQ systems such as ADVARIS, CIQ-AESA or QUASAR.
The VCPX5 measuring device (Product No. 401.0020.07) handles cable and tube samples with an outer diameter of up to 200 mm (7.87 in). Measurements are carried out in accordance with IEC 60811-201, IEC 60811-202, IEC 60811-203, the LV112 automotive standard (A factor) and the American ICEA S-94-649 standard.
Depending on the minimum and maximum outer diameter of the samples tested, the VCPX5 can be fitted with 1 to 3 high-resolution cameras and suitably matched telecentric lenses. This lets one station measure both very small wires and thick power cables up to Ø 200 mm.
The VCPX5 works with the dedicated VELOX measuring software and the ProCable 3 (CAQ) system. It also has open interfaces for direct data export to external CAQ systems such as CIQ-AESA, ADVARIS, QDA-ASI-DATAMYTE or QUASAR.