Data from the manufacturer's catalogue • Wirmec Product Catalog 2025

Wirmec applicators – for strip terminals, insulated terminals, splice and IDC

Applicators for 135.78 mm presses • from 0.75 to 35 mm², mechanical or pneumatic feed

Wirmec makes applicators for crimping strip terminals with side feed and end feed, in mechanical and pneumatic feed versions. The range also includes applicators for insulated terminals on strip (including for split-cycle machines), for splice connections, for turned contacts, for IDC connectors, and the Hercules applicator for large terminals and cross-sections up to 35 mm². All fit presses with a shut height of 135.78 mm and a 40 mm stroke.

📸 Photos from the Wirmec 2025 catalogue (click to enlarge):

Types of Wirmec applicators:

↔️ Side and end feed: WB 10, WL 10, WPB 10, WPL 10

For strip terminals up to 10 mm². WB / WL – mechanical feed with precise three-shaft adjustment, WPB / WPL – pneumatic, very compact.

🟡 Insulated: WB 14, WB 15, WB 16

For one type of insulated terminal on strip (WB 16 – red, blue or yellow, up to 6 mm²). Pneumatic versions WPB 14 / 15 / 16.

🔗 Splice: WL 11, WL 14, WL 19

WL 11 with bottom feed, WL 14 from a single strip (both up to 10 mm²), WL 19 with top feed and no protruding sides, with micrometric head.

💪 Special: WPBH 10, WB 23, WB 24

WPBH 10 Hercules – large terminals up to 35 mm², strip pitch up to 50 mm. WB 23 – turned contacts. WB 24 – IDC connectors with 5 and 2.5 pitch, with the W15 IDC press.

Applicator comparison (per the Wirmec 2025 catalogue):

ModelTypeFeedCross-sectionStrip pitch / thicknessWeight • dimensions (W × D × H)
WB 10side feedmechanicalup to 10 mm²max. 27 mm / max. 1 mm3.9 kg • 145 × 110 × 145 mm
WL 10end feedmechanicalup to 10 mm²max. 27 mm / max. 1 mm3.9 kg • 73 × 170 × 145 mm
WPB 10sidepneumaticup to 10 mm²max. 27 mm / max. 1 mm4 kg • 145 × 135 × 145 mm
WPL 10endpneumaticup to 10 mm²max. 27 mm / max. 1 mm4 kg • 73 × 170 × 145 mm
WB 14 / WPB 14insulated on strip – split-cycle machinemechanical / pneumaticup to 4 mm²max. 27 mm3.9 kg • 145 × 110 × 145 mm
WB 15 / WPB 15insulated on strip – manual operationmechanical / pneumaticup to 4 mm²max. 27 mm4 kg • 145 × 110 × 145 mm
WB 16 / WPB 16insulated (red, blue or yellow) – split cyclemechanical / pneumaticup to 6 mm²max. 27 mm4 kg • 145 × 110 × 145 mm
WPBH 10side Hercules – large terminalspneumaticup to 35 mm²max. 50 mm / max. 1.5 mm5 kg • 300 × 110 × 145 mm
WL 11splice, bottom feed–up to 10 mm²min. clearance: 0 mm right / 12 mm left73 × 170 × 145 mm
WL 14splice, single strip–up to 10 mm²min. clearance: 0 mm right / 12 mm left73 × 170 × 145 mm
WL 19splice, top feed, no protruding sides–up to 2.5 mm²min. clearance 0 mm on both sides73 × 170 × 145 mm
WB 23turned contacts, 4-point crimp–up to 0.75 mm²*–4.5 kg • 145 × 110 × 145 mm
WB 24IDC connectors, 5 and 2.5 pitch (with W15 IDC press)––versions A–L, table below–
WB 13ferrules (per earlier datasheet)for manually fed presses–––
WPB 40 / WPL 40side / end pneumatic, long strip pitch (per earlier datasheet)pneumatic–long pitch–

Common applicator data:

Shut height135.78 mm
Stroke40 mm
Head4-pad as standard; WL 19 – micrometric head, 0.02 mm steps
Counter7-digit, non-resettable (option)
Feed adjustment (WB 10 / WL 10)Three-shaft system – very precise and simple
DocumentationCrimp cross-section micrograph; crimp validation or CMK study on request (per earlier datasheets)

WB 24 – versions for IDC connectors:

WB 24 versionConnector system
WB 24 ATyco MTA 100
WB 24 BStocko ECO-Domo, 5 pitch
WB 24 CWago, 5 pitch
WB 24 DStocko Eco-Tronic, 2.5 pitch
WB 24 ELumberg, 2.5 pitch
WB 24 FTyco MTA 156
WB 24 GLumberg, 2.5 pitch Power
WB 24 HMolex, 2.5 pitch
WB 24 LStocko Eco-Tronic Pro, 2.5 pitch Power

ℹ️ Notes: 2025 catalogue vs earlier datasheets

Which presses do Wirmec applicators fit?

Any press with a shut height of 135.78 mm and a 40 mm stroke – including Wirmec bench presses (W 1500, W15 SC), WSC semi-automatic machines and AM machines. The WB / WPB 14 and 16 applicators are designed for split-cycle machines, the WPBH 10 Hercules for W60 / W120 presses, and the WB 24 is supplied with the W15 IDC press. The fastest way for us to select an applicator is from the terminal drawing or part number.

Frequently asked questions (FAQ):

Which presses do Wirmec applicators fit?

Presses with a shut height of 135.78 mm and a 40 mm stroke – bench presses, semi-automatic and automatic machines. The WPBH 10 Hercules requires a high-force press, e.g. W60 / W120.

Does Wirmec have an applicator for large terminals?

Yes, the WPBH 10 Hercules – terminals up to 1.5 mm thick, strip pitch up to 50 mm, cross-sections up to 35 mm², pneumatic feed.

What splice applicators does Wirmec offer?

WL 11 (bottom feed, up to 10 mm²), WL 14 (single strip, up to 10 mm²) and WL 19 (top feed, no protruding sides, up to 2.5 mm², micrometric head).

Wirmec applicators Side feed / end feed Insulated terminals Splice 135.78 mm