❄️ 3.5 or 5 kW
Two sizes in the same housing, tank approx. 26 l, flow rate approx. 17 l/min.
KombiTec KT-KG chillers are stand-alone units for water-cooling welding system components: weld heads, tongs, dual heads, thermode systems, battery cell welding, and inverters and transformers. They have separate refrigeration and hydraulic circuits, a programmable controller that holds the temperature with low hysteresis, quiet operation and CE marking. They can be mounted on a control cabinet or placed on a trolley. The smaller models (1.6 and 2.65 kW) run on 230 / 220 V mains power.
Chiller dimensions
HA-KG-002 – chiller trolley
KT-KG-MTA-M05-P03 – 2.65 kW chiller
KT-KG-PFA-ECH-160 – compact 1.6 kW chiller
Two sizes in the same housing, tank approx. 26 l, flow rate approx. 17 l/min.
Programmable controller with low temperature hysteresis, separate refrigeration and hydraulic circuits.
Weld heads, tongs, dual heads, thermodes, battery cell welding, inverters and transformers; quick couplings.
Below 62 dB(A), powder-coated steel housing, IP 54, CE mark.
| Model | Cooling capacity | Power supply | Tank | Flow rate | Protection / noise | Weight (empty) |
|---|---|---|---|---|---|---|
| KT-KG-PFA-ECH-160 | approx. 1.6 kW | 230 V / 50 Hz | 5 l | approx. 5 l/min | IP 22, < 67 dB(A) | approx. 65 kg |
| KT-KG-MTA-M05-P03 | approx. 2.65 kW | 220 V / 50 Hz | approx. 15 l | approx. 16 l/min | IP 33, < 62 dB(A) at 1 m | approx. 71 kg |
| KT-KG-PFA-ECH-350 | approx. 3.5 kW | 400 V / 50 Hz | approx. 26 l | approx. 17 l/min | IP 54, < 62 dB(A) | approx. 109 kg |
| KT-KG-PFA-ECH-500 | approx. 5.0 kW | 400 V / 50 Hz | approx. 26 l | approx. 17 l/min | IP 54, < 62 dB(A) | approx. 111 kg |
| Coolant | Water |
|---|---|
| External dimensions | ECH-350 / 500: 600 × 676 × 921.5 mm • MTA: 486 × 660 × 623 mm • ECH-160: 602 × 520 × 508 mm |
| Note | Air inlet and outlet must be kept clear |
| HA-KG-002 trolley | Bosch Rexroth profile, 4 swivel castors (2 with brake), approx. 620 × 680 × 130 mm, approx. 10 kg |
| HA-KG-001 trolley | For compact chillers, approx. 5 kg |
| MTA / ECH-160 equipment | Pump-protecting bypass, digital thermometer, remote switch-on, alarm signal, stainless-steel frame, chassis; MTA: pressure switch and settings panel |
For small systems and micro-welding, the compact 1.6 kW chiller (230 V) is usually enough; for a single station with a weld head or compacting tool, 2.65 or 3.5 kW; and for higher currents and several consumers, e.g. a KWZ-10 with an inverter, 5 kW. We size the capacity to the whole system and the conditions in your hall. The chiller fits the HA station and all KombiTec weld heads.
Welding heads and tongs, dual heads, thermode systems, battery cell welding, and welding inverters and transformers.
Approx. 1.6 kW (ECH-160), 2.65 kW (MTA-M05-P03), 3.5 kW (ECH-350) and 5.0 kW (ECH-500), depending on ambient conditions.
Yes, the HA-KG-002 trolley on 4 swivel castors, 2 of them with brakes, is available.