🔥 Splicing and Compacting 0.5–12.0 mm²
Making splice connections, dimensionally stable compacting of multiple strands (up to 10.0 mm long), and joining coated and enamelled wires with ferrules.
KombiTec KWZ-Splice is a compact resistance welding unit recessed into the workbench top, designed by the German company KombiTec GmbH (Betzigau) for making splice connections, dimensionally stable compacting of stranded copper wires in a total range of 0.5 – 12.0 mm² (length up to 10.0 mm), and joining enamelled and coated wires.
KWZ-Splice design: Ø 40/63 cylinder, 10 mm displacement sensor, guard and wire insert
Three-view dimensional drawing of the KWZ-Splice head (210 × 440 × approx. 405 mm)
Making splice connections, dimensionally stable compacting of multiple strands (up to 10.0 mm long), and joining coated and enamelled wires with ferrules.
Guidance on pre-stressed ball bearings, maximum rigidity of the form-fit connection and a built-in displacement sensor (10 mm range).
Optimised tool life thanks to liquid-cooled electrodes, and high welding current of up to approx. 15.0 kA (at 20% duty cycle).
Recessing the tool directly into the workbench top gives the operator the ideal working height, easy adjustment of the stroke and sensors, and a fully enclosed welding zone (splash guard).
| Device model | Compacting-unit KWZ-Splice (KombiTec GmbH, Betzigau) |
|---|---|
| Stranded wire cross-section range | 0.5 mm² – approx. 12.0 mm² (total cross-section of all joined wires) |
| Maximum compacting length | 10.0 mm |
| Application areas | Splice connections, compacting of strand ends, coated and enamelled wires (with ferrules), wiring harness and coil production |
| Drive cylinder diameter | Ø 40 mm / Ø 63 mm |
| Theoretical pressing force (at 5 bar) | Approx. 1,500 N (extend, for Ø 63 mm cylinder) |
| Maximum electrode stroke | 10 mm (integrated displacement sensor with 10 mm range) |
| Positioning repeatability | ± 0.05 mm (guides on pre-stressed ball bearings) |
| Maximum welding current | Approx. 15.0 kA at 20% duty cycle (water-cooled electrodes) |
| Max. electrode holder weight | Approx. 1 kg |
| Compressed air and pressure required | Filtered to 5 μm, water-free / dry • Operating pressure: 2.5 – 6 bar |
| Pneumatic connections and air consumption | Ø 6 mm and Ø 8 mm ports • Consumption: 0.20 l / cycle (at 5 bar and max. stroke) |
| Working temperature | 0 °C – 60 °C |
| Mounting dimensions and weight | W 210 mm × D 400/440 mm × H above bench approx. 405 mm • Weight: approx. 33.4 kg |
When you need to compact wire ends or make 0.5–12 mm² splices by resistance welding. This technology has no sonotrodes or anvils to replace, and the process also copes with enamelled wires. The displacement sensor and ±0.05 mm repeatability make quality control of every joint easier. Tools for compacting strand ends (0.06–12 mm²) are compared on the KWZ tools page.
The KombiTec KWZ-Splice compacting unit handles stranded wires in a total cross-section range from 0.5 mm² to approx. 12.0 mm² (sum of all joined wires). The maximum compacting length is 10.0 mm.
The KWZ-Splice is used in wiring harness production and coil production: it makes splice connections, dimensionally stable compacting of stranded wire ends, joining of coated wires, and joining of winding (enamelled) wires and strands using ferrules.
The unit has a Ø 40 mm or Ø 63 mm pneumatic cylinder generating a theoretical force of approx. 1500 N (at 5 bar with the Ø 63 mm cylinder), a max. electrode stroke of 10 mm, a built-in displacement sensor (10 mm measuring range), ±0.05 mm repeatability, water-cooled electrodes, a welding current of approx. 15.0 kA (at 20% duty cycle) and a weight of approx. 33.4 kg.