🔬 From conductors < 1 mm to Ø 48 mm
Measurement of insulation and jacket thickness from very thin conductors to cables with 48 mm outer diameter.
VisioCablePro® VCPLab is a camera-based device for measuring the geometry of cable insulation and jackets, designed for laboratory use. It measures everything from very thin conductors below 1 mm to cable jackets up to 48 mm outer diameter. The sample is backlit from below by LUMIMAX® lighting, virtually without shadows, and the result appears within seconds. Focus and exposure are set manually. The housing is sealed against external light and resistant to shocks and vibration.
Measuring chamber with camera and LUMIMAX® lighting
VCPLab with All-In-One PC and measuring software
Measurement of insulation and jacket thickness from very thin conductors to cables with 48 mm outer diameter.
Measurement per EN 50396, HD 605, ICEA S-94-649-2000, IEC 60502-1, IEC 60811-201/-202/-203, IEC 60840 and LV112 (A factor).
LUMIMAX® transmitted light virtually without shadows, resolution 0.1% of the image field.
The camera configuration is matched to the minimum and maximum diameter of your samples.
| Product number | 401.0003.05 |
|---|---|
| Dimensions | 600 × 360 × H 1110 mm |
| Weight | 40 kg |
| Power supply | 100–240 V, 50–60 Hz |
| Power | max. 100 W |
| Resolution | 0.1% of the image field |
| Lighting | LED LUMIMAX® |
| Cameras | 1–2 (configuration depends on sample diameter range) |
| Measuring range | up to Ø 48 mm outer diameter |
| Standards | EN 50396, HD 605, ICEA S-94-649-2000, IEC 60502-1, IEC 60811-201/-202/-203, IEC 60840, LV112 (A factor) |
| Software | VELOX, ProCable3 CAQ system |
When you measure cable samples up to Ø 48 mm in the lab and need a report compliant with cable standards. For cables and tubes up to Ø 200 mm and use on the shop floor too, there is the VCPX5, and for automatic measurement at the extrusion line the AlphaOne. Prepare the samples with the ORC VC65 cutter.
Samples from very thin conductors below 1 mm to cable jackets up to 48 mm outer diameter.
EN 50396, HD 605, ICEA S-94-649-2000, IEC 60502-1, IEC 60811-201/-202/-203, IEC 60840 and LV112 (A factor).
1 or 2. The manufacturer selects the configuration based on the minimum and maximum diameter of the samples you want to measure.